productfinder-link Productfinder search-link Search mail-link Contact Us
productfinder-link search-link mail-link phone-link

High dump bucket

When large overloading or dumping heights are required or the reach of the loader needs to be increased (loading lorries and wagons, feeding silos and containers).

  • Loader 5-30 tonnes
  • Hardox® in my body
  • Cylinder in the centre or on the side, optionally with hydraulic hold-down device
Hochkippschaufel 7m³ 3400mm VOLVO L90 SW
Hochkippschaufel 7m³ 3400mm VOLVO L90 SW
Hochkippschaufel seitliche Zylinder 4,5m³ 2700mm USM SW
Hochkippschaufel seitliche Zylinder 4,5m³ 2700mm USM SW
Hochkippschaufel mit Niederhalter 4m³ 2990mm USM VOLVO SW
Hochkippschaufel mit Niederhalter 4m³ 2990mm USM VOLVO SW

Versions and options

Suitable for all standard quick coupler systems, alternatively fixed bolted, but always perfectly matched to the original kinematics.

High dump buckets are mainly used for lighter bulk materials. However, our HD series can also be used to load heavy bulk materials up to 2 tonnes/m³. These machines are used both for reloading gravel and crushed mineral raw materials and for handling heavy residual waste or scrap.

Cylinder centre

High dump buckets with central cylinders can be used for lighter and predominantly dry bulk materials.
This design is mainly used for grain, wood chips, fertilizers, coal, expanded clay and similar dry and easy-to-load bulk materials. This version is characterised by its low dead weight and large volume.

Cylinder sideways

Side cylinders are used for heavier or difficult to load and sometimes wet or sticky bulk materials. Due to its design, this bucket offers less penetration resistance than the Versions with centre cylinders, but has a higher dead weight. Typical materials are bulky residual waste, compost or biogenic residues, sewage sludge, paper but also scrap.

Hydraulic hold-down device (optional)

For high dump buckets with side cylinders. For applications with bulky material such as handling bulky waste, biogenic material or scrap, the hydraulically operated hold-down device holds the material securely in position during the loading cycle.

Design features and material
  • Robust main bearing with replaceable, hardened steel bushes
  • All bearing pins made from tempered steel, inductively surface-hardened
  • Hydraulic cylinder end-position dampened on both sides
  • Rubber buffer as damper for the dump movement
  • Adjustable throttle valve for regulating the extension and tipping speed
  • Optional overflow plate or overflow grille
  • Visible grille optional
  • Bucket body mainly made of fine-grained structural steel
  • Cutting edge or blade carrier made from HB 500 blade steels
  • Bucket corners or side cutting edges at least Hardox® 450
  • Wear strips on the blade base HB 500
Wear parts and options
  • Bolted undercutting knife HB 500, optionally reversible, multi-part or one-part
  • With countersunk nuts
  • Half-arrow profile HB 500 tacked on
  • Bronze underscrew blade screwed (non-sparking)
  • Screw-on plastic bottom blade
Areas of application

Get in touch now

+43 3175 7110

Request